GB/T 13268-1991 大氣 試驗粉塵標準樣品 黃土塵

本標準規定了黃土塵的原料來源、主要化學成分、粒徑分布以及包裝、貯存和使用條件。 本標準所規定的黃土塵適用于模擬大氣中的地面揚塵，進行除塵器、空氣濾清裝置的性能試驗，在機械儀表的耐磨耐久試驗、空氣含塵濃度中的模擬方面亦可參考使用。

Atmospheric Air--Test Dust Standard Sample--Loess dust

GB/T 13269-1991 大氣 試驗粉塵標準樣品 煤飛灰

本標準規定了二種煤飛灰試驗塵的材料來源、基本物性數值以及包裝、貯存和使用條件。 本標準規定的二種煤飛灰試驗塵適用于除塵器的除塵性能試驗及產品質量檢驗。

Atmospheric Air--Test Dust Standard Sample--Fly Ash

GB/T 13270-1991 大氣 試驗粉塵標準樣品 模擬大氣塵

本標準規定了模擬大氣塵的原料、成分配比以及包裝貯存和使用條件。 模擬大氣塵適用于模擬受到工業污染的城市大氣塵對空氣過濾器進行性能試驗；對大氣含塵濃度進行模擬，在配合其他環保設備的性能測試時可參考采用。

Aemospheric air--Test dust standand sample--Simulated atmospheric dust

GB 13270-1990 大氣試驗粉塵標準樣品模擬大氣塵

Atmospheric air—Test dust standard sample—Simulated atmospheric dust

GB 13269-1991 大氣 試驗粉塵標準樣品 煤飛灰

Atmospheric test dust standard sample coal fly ash

GB 13270-1991 大氣 試驗粉塵標準樣品 模擬大氣塵

Atmospheric test dust standard sample simulates atmospheric dust

GB 13268-1991 大氣 試驗粉塵標準樣品 黃土塵

Atmospheric test dust standard sample loess dust

JJG 147-2017 標準金屬布氏硬度塊

本規程適用于標準金屬布氏硬度塊的首次檢定、后續檢定和使用中檢驗。

Metallic Brinell Hardness Reference Blocks

KS Q ISO 11095:2012 使用標準物質作線性校準

? ??? ??? ?? ??? ???? ??.a) ?????? ?? ??? “???” ?????? ??? ?? ??? ???? ?? ??? ???? ??? ?? ??? ??b) ????? ??― ??? ??? ??? ? ?? ?? ? ?? ? ?? ????? ??????? ?? ??― ????? ??? ??? ?? ??? ?? ??? ?? ??― ???? ????? ?? ???? ?? ??? ???? ?? ?? ??c) ????? ????? ?? ????? ??― ????? ??? ??? ??? ??― ????? ?? ??? ?? ???? ????? ?? ??d) ?? ????? ????? ?? ? ?? ??? ??e) ????? ????? ?? ??? ??? ????? ??? ??? ?????? ??? ????.? ??? ??????? ??? ?????? ?? ????. ? ??? ??? ??? ??????? ????. ????? ???? ??, 8.3? ??? “????”? ???? ?? ???? ??? ? ??.? ??? ????? ??? ???? ??? ? ??? ?????? ???? ?? ??? ????? ????? ??? ?? ??? ????.

Linear calibration using reference materials

GJB 6746-2009 光譜標準油規范

本規范規定了光譜標準油的要求。 本規范適用于由基礎油、有機金屬化合物、有機硅化合物、有機硼化合物和穩定劑調配而成的光譜標準油。

Specification for spectrometric oil standards

PD 6532-2-2000 基準材料.基準材料合格證內容指南.基準材料合格證和標簽內容指南

Assists producers to prepare clear and concise certificates of reference materials that summarize the information needed by the user. Information to be provided on a certificate is listed under a series of headings. Each heading is further explained and examples are provided where necessary.

Reference materials. Guide to the contents of certificates of reference materials. Guide to the contents of certificates and labels of reference materials

PD 6532-3-2000 基準材料.基準材料合格證內容指南.合格的基準材料使用指南

Explains the proper uses and potential misuses of CRMs. Gives recommendations for using CRMs to assess precision and trueness of measurement. Discusses the use of CRMs for the definition and use of conventional measurement scales, including practical temperature, octane number, soluble solids, pH, turbidity, hardness and the Roga test.

Reference materials. Guide to the contents of certificates of reference materials. Guide to the uses of certified reference materials

ISO 8529-2:2000 中子參考輻射 第2部分:與表征輻射場基本量有關的輻射防護儀表的校準原則

This part of ISO 8529 takes as its starting point the neutron sources described in ISO 8529-1. It specifies the procedures to be used for realizing the calibration conditions of radiation protection devices in neutron fields produced by these calibration sources, with particular emphasis on the corrections for extraneous effects (e.g., the neutrons scattered from the walls of the calibration room). In this part of ISO 8529, particular emphasis is placed on calibrations using radionuclide sources (clauses 4 to 6) due to their widespread application, with less details given on the use of accelerator and reactor sources (8.2 and 8.3). This part of ISO 8529 then leads to ISO 8529-3 which gives conversion coefficients and the general rules and procedures for calibration.

Reference neutron radiations - Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field

PD 6532-5-2000 基準材料.基準材料合格證內容指南.基準材料生產者能力的一般要求

Reference materials. Guide to the contents of certificates of reference materials. General requirements for the competence of reference material producers

JIS B 7740:1999 擺錘式?jīng)_擊試驗.試驗機械檢定用標準試驗樣品

この規格は， JIS B 7722のシャルピー振子式衝撃試験機の間接検証に用いる基準試験片の調製と認定の方法及びその証明書について規定する。ここで示すノッチ試験片の寸法は，JIS Z 2202の規定による。しかし，その許容差はより厳しい?；瘜W成分，熱処理，又はその両方の條件を変えることによって，求められるエネルギーレべルが得られる。基準試験片は，ここで規定する基準試験機で格付けされる。

Charpy pendulum impact test -- Reference test pieces for verification of testing machines

JJF 1050-1996 工作用熱傳導真空計校準規范

Calibration Specification of Working Thermal Conducting Vacuum Gauge

JJF 1049-1995 溫度傳感器動態響應校準規范

Calibration Specification of Temperature Sensor's Dynamic Response

DZ/T 0083-1993 核地球物理刻度井標準

本標準規定了核地球物理刻度井(又稱標準模型)的種類、分級、技術要求、計量單位及設置環境，適用于核地球物理測井儀器的刻度。

Nuclear Geophysical Calibration Well Standards

PD 6532-1-1993 標準物資.標準物質合格證內容指南.有關標準物資的術語和定義指南

Terms related to materials, measurement and testing, and certification and issuance of reference materials are explained, as are some additional statistical and metrological terms.

Reference materials. Guide to the contents of certificates of reference materials. Guide to terms and definitions used in connection with reference materials

ISO 8529:1989 輻射防護和測定作為中子能函數的中子輻射反應用的中子測量裝置校準用的中子基準輻射

Neutron reference radiations for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy