GB/T 39897-2021 車內非金屬部件揮發性有機物和醛酮類物質檢測方法

本標準規定了車內非金屬部件揮發性有機物和醛酮類物質檢測的術語和定義、樣品準備、包裝、運輸、接收、前處理及采樣方法、測定及結果計算、試驗報告等內容。本標準適用于M1 類和N1 類車輛乘員艙及行李艙內非金屬部件揮發性有機物和醛酮類物質的采樣和測定,其他類型車輛可參照執行。

Determination of volatile organic compounds and aldehydes and ketones in nonmetallic parts of vehicles

QC/T 1162-2022 汽車外飾件用蜂窩夾層結構制品

Honeycomb sandwich structure products for automotive exterior parts

QC/T 794-2020 內燃機工業濾紙

Internal combustion engine industrial filter paper

DB37/T 3141-2018 動車組座椅阻燃面料技術要求

Technical requirements for flame retardant fabrics for EMU seats

EN 13807:2017 運輸氣瓶-電池車輛和多元素氣體容器(MEGCs)-設計,制造,鑒定和測試

This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles and MEGCs containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to battery vehicles and MEGC for toxic gases with an LC50 value less than or equal to 200 ml/m3. This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually. This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks. This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles.

Transportable gas cylinders - Battery vehicles - Design@ manufacture@ identification and testing

QC/T 1000.2-2015 汽車濾清器用非織布性能要求和測試方法 第2部分:空氣濾清器用

本部分規定了空氣濾清器用非織造布(以下簡稱濾布)的分類、要求、測試方法、檢驗規則、標志、包裝、運輸和儲存。 本部分適用于空氣濾清器用非織造布。

Performance requirements and test methods of non-woven on automotive filter.Part 2:Non-woven of filters for air filter

QC/T 1000.1-2015 汽車濾清器用非織布性能要求和測試方法 第1部分:乘駕室空氣濾清器用

本部分規定了汽車乘駕室空氣濾清器用非織造布(以下簡稱濾布)的分類、要求、測試方法、檢驗規則、標志、包裝、運輸和儲存。 本部分適用于汽車乘駕室空氣濾清器用非織造布。

Performance requirements and test methods of non-woven on automotive filter.Part 1:Non-woven of filters for passenger compartment

ISO 3537:2015 道路車輛.安全玻璃材料.力學性能試驗

This International Standard specifies mechanical test methods relating to the safety requirements for all safety glazing materials in a road vehicle, whatever the type of glass or other material of which they are composed.

Road vehicles - Safety glazing materials - Mechanical tests

GOST 33683-2015 散裝材料用1520 mm輪距有蓋漏斗車的聚合物復合結構. 規格

Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications

CFR 49-571.10-2014 交通運輸. 第571部分:聯邦機動車輛安全標準. 第A子部分:總則. 第571.10節:指定的座位位置.

(a) Application. This section applies to passenger cars, trucks, multipurpose passenger vehicles, and buses manufactured on or after September 1, 2010. However, paragraph (b) of this section does not apply to trucks and multipurpose passenger vehicles with a gross vehicle weight rating greater than 10,000 lbs, school buses, police vehicles as defined in S7 of Standard No. 208 (49 CFR 571.208), firefighting vehicles, ambulances, or motor homes. To determine the number of passenger seating positions in school buses, see S4.1 of Standard No. 222 (49 CFR 571.222).

Transportaion. Part571:Federal motor vehicle safety standards. SubpartA:General. Section571.10:Designation of seating positions.

SAE J403-2014 SAE 碳鋼的化學成分

In 1941, the SAE Iron and Steel Division, in collaboration with the American Iron and Steel Institute (AISI), made a major change in the method of expressing composition ranges for the SAE steels. The plan, as now applied, is based in general on narrower cast or heat analysis ranges plus certain product analysis allowances on individual samples, in place of the fixed ranges and limits without tolerances formerly provided for carbon and other elements in SAE steels. For years the variety of chemical compositions of steel has been a matter of concern in the steel industry. It was recognized that production of fewer grades of steel could result in improved del

Chemical Compositions of SAE Carbon Steels

SAE J671-2014 振動阻尼材料和底盤涂料

"Description of Material??The materials classified under this specification are: a. Mastic vibration damping materials used to reduce the sound emanating from metal panels. b. Mastic underbody coatings used to give protection and some vibration damping to motor vehicle underbodies@ fenders@ and other parts. Numbering System PREFIXES??The prefix ""D"" is used to indicate a cut back vibration damping material and the prefix ""U"" is used to indicate a cut back underbody coating material. Should a water emulsion be desired@ the prefix should be followed by the letter ""E."" Should a solvent-water emulsion be desired@ the prefix should be followed by the letter ""F."" TYPES??The materials are further divided into types@ based on the decay rate in decibels per second (dB/s) at 21 ?? and classes@ based on the percentage of solids contained in the material. Example of the Use of Numbers??A cut back underbody coating having a decay rate of 5 dB/s and a solids content of 65% would be designated by the number U-565. An emulsion body damping material of medium decay rate and maximum solids content would be numbered DE-1090. Any combination of type and class could be used to suit the needs of the application."

Vibration Damping Materials and Underbody Coatings

QC/T 944-2013 汽車材料中多溴聯苯（PBBs）和多溴二苯醚（PBDEs）的檢測方法

本標準規定了汽車材料中多溴聯苯和多溴二苯醚含量的檢測方法?！癤射線熒光光譜法”適用于用X射線熒光光譜法篩選和快速判定汽車材料中溴的含量?！皻庀嗌V-質譜(GC - MS)聯用法”適用于用氣相色譜-質譜聯用法測定汽車材料中多溴聯苯和多溴二苯醚的含量。

The methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials

QC/T 941-2013 汽車材料中汞的檢測方法

本標準規定了汽車材料中汞含量的檢測方法。“X射線熒光光譜法”適用于篩選和快速判定汽車材料中汞的含量。“冷原子吸收光譜法、原子熒光光譜法、電感耦合等離子體原子發射光譜法或電感耦合等離子體質譜法”適用于定量測定汽車材料中汞的含量?！爸苯訙y汞法”適用于定量測定汽車材料中汞的含量。

Test methods of mercury in automobiles materials

QC/T 942-2013 汽車材料中六價鉻的檢測方法

本標準規定了汽車零部件及材料中六價鉻含量的檢測方法。其中:“X射線熒光光譜法”適用于采用X射線熒光光譜法篩選和快速判定汽車材料中六價鉻的含量?！敖饘俜栏儗又辛鶅r鉻定性試驗”適用于采用點滴試驗法和沸水萃取法定性確定汽車防腐鍍層中六價鉻的存在?！敖饘俜栏儗又辛鶅r鉻含量測定”適用于采用沸水萃取、比色法定量測定汽車防腐鍍層中六價鉻的含量?！敖饘俜栏儗又辛鶅r鉻定性試驗”和“金屬防腐鍍層中六價鉻含量測定”適用于無附加覆蓋層(例如:油膜、水基或溶劑型聚合物膜或蠟?zāi)?的鍍層?！熬酆衔锊牧虾碗娮硬牧现辛鶅r鉻含量測定”適用于采用堿液萃取、比色法測定汽車聚合物材料和汽車電子材料中六價鉻的含量,不適用于聚乙烯(PE)和乙烯-乙酸乙烯酯共聚物(EVAC)材料。其他汽車材料,如玻璃、陶瓷、織物和油漆涂層中的六價鉻含量參照本方法測定?！捌じ锊牧现辛鶅r鉻含量測定”適用于采用磷酸鹽液萃取、比色法測定汽車皮革材料中六價鉻的含量。

Test methods of hexavalent chromium in automobiles materials

QC/T 943-2013 汽車材料中鉛、鎘的檢測方法

本標準規定了汽車材料中鉛、鎘含量的檢測方法?！癤射線熒光光譜法”適用于篩選和快速判定汽車材料中鉛、鎘的含量。“光電直讀光譜法測定鋼鐵、銅及銅合金、鋁及鋁合金材料中的鉛、鎘”適用于定量檢測汽車材料中鋼鐵、銅及銅合金、鋁及鋁合金棒狀或塊狀材料中鉛、鎘元素的含量?！霸游展庾V法、電感耦合等離子體原子發射光譜法或電感耦合等離子體質譜法測定汽車材料中鉛、鎘含量”適用于定量檢測汽車材料中鉛、鎘的含量。

Test methods of lead and cadmium in automobiles materials

DIN EN ISO 14451-3:2013 點火制品.機動車輛點火制品.第3部分:標記(ISO 14451-3-2013).德文版本EN ISO 14451-3-2013

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013); German version EN ISO 14451-3:2013

SAE J1119-2013 翻轉防護結構(ROPS)和落物防護結構(FOPS)用鋼制品

This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. The purpose of this information report is to provide concepts for rational selection and application of materials for Rollover protective structures (ROPS) and Falling Object Protective Structures (FOPS) and to provide information about the properties that should be considered in selecting and utilizing material in protective structures. While other materials could conceivably be used successfully, this report is limited t

Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)

SAE J369-2013 聚合內飾材料易燃性的水平試驗方法

This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.

Flammability of Polymeric Interior Materials Horizontal Test Method

NF R19-900-10*NF EN ISO 14451-10:2013 點火制品.機動車輛點火制品.第10部分:半成品要求和分類

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: requirements and categorization for semi finished products