GB/T 28957.1-2023 道路車輛 用于濾清器評定的試驗粉塵 第1部分：氧化硅試驗粉塵

Test dusts for filter evaluation in road vehicles Part 1: Silica test dusts

GB/T 37154-2018 燃料電池電動汽車 整車氫氣排放測試方法

Fuel cell electric vehicles—Test methods of hydrogen emission

GB/T 34600-2017 汽車零部件再制造產品技術規范 點燃式、壓燃式發動機

The technical specification for remanufacturing of automotive components—Spark and compression ignition engines

GB/T 34593-2017 燃料電池發動機氫氣排放測試方法

Test methods of hydrogen emission for fuel cell engine

GB/T 32231-2015 全地形車發動機通用技術條件

本標準規定了全地形車發動機的術語和定義、要求、試驗方法、檢驗規則、標志、使用說明書、包裝、運輸及貯存。 本標準僅適用于GB/T 24936中所定義的內燃機式全地形車所使用的發動機(以下簡稱“發動機”)。

General technical specifications of engine used for all-terrain vehicles

GB/T 28957.1-2012 道路車輛 用于濾清器評定的試驗粉塵 第1部分：氧化硅試驗粉塵

GB/T 28957的本部分規定了用亞利桑那沙漠沙粒制造的四個等級的試驗粉塵和BF氧化硅系列的兩種試驗粉塵的顆粒尺寸分布界限和化學成分、本部分適用于對道路車輛用濾清器濾清器的性能測定,也適用于一般用途的內燃機用濾清器的性能測定和軸承、密封件等部件的磨損研究、

Road vehicles.Test dust for filter evaluation.Part 1:Silicon dioxide test dust

GB/T 28674-2012 汽車零部件再制造產品技術規范.轉向器

本標準規定了齒輪齒條式、循環球式機械和液壓助力轉向器再制造術語和定義，拆解、分類與清洗，檢修與修復，總成裝配要求，性能要求和試驗方法，檢驗規則，標識與包裝等 。 本標準適用于齒輪齒條式、循環球式機械和液壓助力轉向器的再制造。 本標準不適用于電液伺服轉向器和電子轉向器。 本標準不適用于發生過火災或碰撞事故的轉向器。

The technical specifications for remanufacturing of automotive components.Steering gear

GB/T 19055-2003 汽車發動機可靠性試驗方法

本標準規定了汽車發動機在臺架上整機的一般可靠性試驗方法，其中包括負荷試驗規范(如交變負荷、混合負荷和全速全負荷)、冷熱沖擊試驗規范及可靠性評定方法。 本標準適用于乘用車、商用車的水冷發動機，不適用于摩托車及拖拉機用發動機。該類發動機屬往復式、轉子式，不含自由活塞式。其中包括點燃機及壓燃機；二沖程機及四沖程機；非增壓機及增壓機(機械增壓及渦輪增壓、水對空及空對空中冷)；適用于燃用汽油、柴油、天然氣、液化石油氣和醇類等燃料的發動機。 新設計或重大改進的汽車發動機定型、轉廠生產的發動機認證以及現生產的發動機質量檢驗均可按本標準規定的方法進行可靠性試驗。 本標準還可作為發動機制造廠和汽車制造廠之間交往的技術依據。

Reliability test methods for motor vehicle engines

GB/T 18297-2001 汽車發動機性能試驗方法

本標準規定了汽車用發動機性能臺架試驗方法，其中包括各種負荷下的動力性及經濟性試驗方法，無負荷下的起動、怠速、機械損失功率試驗方法以及有關氣缸密封性的活塞漏氣量及機油消耗量試驗方法等，用來評定汽車發動機的性能。 本標準適用于轎車、載貨汽車及其他陸用車輛的內燃機，不適用于摩托車及拖拉機用內燃機。該內燃機屬往復式、轉子式，不含自由活塞式。其中包括點燃及壓燃機、二沖程及四沖程機、非增壓及增壓機（機械增壓、渦輪增壓及中冷）、水冷及風冷機。 凡新設計及有重大改進的發動機定型試驗、轉產生產的發動機驗證試驗以及現生產的發動機質量檢驗試驗等，均按本標準規定的方法進行。 本標準還可作發動機制造廠和汽車制造廠之間交往的技術依據。

Performance test code for road vehicle engines

GB/T 17692-1999 汽車用發動機凈功率測試方法

本標準規定了汽車用發動機凈功率測量方法。 本標準適用于由制造廠提出M和N類汽車用發動機凈功率相對于轉速變化的曲線。 本標準適用于往復活塞發動機（點燃式或壓燃式）或轉子發動機（點燃式或壓燃式），但不包括自由活塞發動機。

Measurement methods of net power for automotive engines

GB/T 12782-1991 汽車采暖性能試驗方法

本標準規定了汽車采暖性能要求和試驗方法。 本標準適用于各種類型汽車。

Motor vehicle--Heating performance--Test method

QC/T 1145-2021 柴油/甲醇雙燃料發動機技術條件

Diesel/methanol dual fuel engine technical conditions

EN 16905-1:2017 燃氣吸熱發動機驅動的熱泵.第1部分:術語和定義

EN 16905 series This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance". This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. EN 16905-1 This part of EN 16905 series specifies the terms and definitions of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.

Gas-fired endothermic engine driven heat pumps - Part 1: Terms and definitions

EN 16905-3:2017 燃氣吸熱發動機驅動熱泵.第3部分:試驗條件

EN 16905 series This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance". This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the 1) heating water circuit (if installed) does not exceed 6 bar; 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. EN 16905-3 This part of the EN 16905 series specifies the test conditions for the rating of energy parameters of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.

Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions

EN 16905-5:2017 燃氣吸熱發動機驅動熱泵.第5部分:加熱和冷卻模式季節性性能的計算

This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance". This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar, 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. EN 16905-5 This part of the EN 16905 series specifies the calculation of seasonal performance factor for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.

Gas-fired endothermic engine driven heat pumps - Part 5: Calculation of seasonal performances in heating and cooling mode

EN 16905-4:2017 燃氣吸熱式發動機驅動的熱泵 第4部分：測試方法

This European Standard specifies the requirements, test methods and test conditions for the rating and performance calculation of air conditioners and heat pumps using either air, water or brine as heat transfer media, with gas-fired endothermic engine driven compressors when used for space heating, cooling and refrigeration, hereafter referred to as "GEHP appliance". This European Standard only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This European Standard only applies to appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437. This European Standard only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; d) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar; 2) domestic hot water circuit (if installed) does not exceed 10 bar. This European Standard applies to appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard. Packaged units, single split and multisplit systems are covered by this European Standard. Single duct and double duct units are covered by this European Standard. The above appliances can have one or more primary or secondary functions. This European Standard is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. NOTE All the symbols given in this text are used regardless of the language used. EN 16905-4 This part of the EN 16905 series specifies the test methods for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery.

Gas-fired endothermic engine driven heat pumps - Part 4: Test methods

EN 16942:2016 燃料.車輛兼容性的識別.消費者信息的圖解表示法

This European Standard lays down harmonized identifiers for marketed liquid and gaseous fuels. The requirements in this standard are to complement the informational needs of users regarding the compatibility between the fuels and the vehicles that are placed on the market. The identifier is intended to be visualized at dispensers and refuelling points, on vehicles, in motor vehicle dealerships and in consumer manuals as described in this document. Marketed fuels include for example petroleum-derived fuels, synthetic fuels, biofuels, natural gas, liquefied petroleum gas, hydrogen and biogas and blends of the aforementioned delivered to mobile applications.

Fuels - Identification of vehicle compatibility - Graphical expression for consumer information

ISO 17447-3:2015 道路車輛. 帶錐形閥座和氣缸頭罩的電熱塞. 第3部分: 試驗和要求

This part of ISO 17447 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to glow-plugs conforming to ISO 17447-1 and ISO 17447-2, used in diesel (compression ignition) engines.

Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 3: Tests and requirements

ISO 17447-1:2015 道路車輛. 帶錐形閥座和氣缸頭罩的電熱塞. 第1部分: 金屬護套型電熱塞的基本特征和尺寸

Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs

ISO 17447-2:2015 道路車輛. 帶錐形閥座和氣缸頭罩的電熱塞. 第2部分: 陶瓷護套型電熱塞的基本特征和尺寸

This part of ISO 17447 specifies the main properties and dimensions of ceramic-sheath-type glowplugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

Road Vehicles - Glow-plugs with conical seating and their cylinder head housing - Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs