T27 車箱 標準查詢與下載
共找到 25 條與 車箱 相關的標準，共 2 頁
This European Standard specifies the minimum performance and construction requirements for overfill prevention controllers located on the tank vehicle. This European Standard applies to overfill prevention controllers for liquid fuels, having a flash point up to but not exceeding +100 °C. The requirements apply to overfill prevention controllers suitable for use at ambient temperatures in the range from -25 °C to +60 °C, and subject to normal operational pressure variations. With the amendment the information concerning the patent was be deleted because this patent is expired.
Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks; German version EN 16657:2016+A1:2018
- ICS
- 13.300;23.020.10;23.020.20;75.200
- CCS
- T27
- 發布
- 2018-08-01
- 實施
Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks; German version EN 16657:2016
- ICS
- 13.300;23.020.10;23.020.20;75.200
- CCS
- T27
- 發布
- 2016-11
- 實施
Tanks for the transport of dangerous goods. Transport tank equipment for overfill prevention devices for static tanks
- ICS
- 13.300;23.020.20
- CCS
- T27
- 發布
- 2016-06-30
- 實施
- 2016-06-30
Scratch resistance test method for automotive interior materials
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2016-03-09
- 實施
- 2016-10-01
Motor vehicles. Air reservoirs. Technical requirements and test methods
- ICS
- 43.040.40
- CCS
- T27
- 發布
- 2015
- 實施
- 2017-04-01
Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for breather devices; German version EN 16522:2014
- ICS
- 13.300;23.020.20;23.060.40
- CCS
- T27
- 發布
- 2014-07
- 實施
Tanks for transport of dangerous goods. Service equipment for tanks. Flame arresters for breather devices
- ICS
- 13.300;23.020.20;23.060.40
- CCS
- T27
- 發布
- 2014-05-31
- 實施
- 2014-05-31
本標準規定了帶有行李廂的乘用車,用于被困于行李廂內的人員逃離行李廂的開啟機構的要求。本標準適用于帶行李廂的乘用車,不適用于帶后背門的乘用車。
Interior trunk release for compartment of a passenger car
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2014-05-06
- 實施
- 2014-10-01
This SAE Recommended Practice provides design, test, and performance guidelines on the comfort, fit, and convenience for active restraint systems for heavy trucks and multipurpose passenger vehicle applications over 10 000 lbs gross vehicle weight rating (GVWR). The information pertains to the forward facing seating positions.
Seat Belt Comfort, Fit, and Convenience - Truck and Bus
- ICS
- 43.040.80
- CCS
- T27
- 發布
- 2014-01-24
- 實施
The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated.
Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2014-01-06
- 實施
This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. The intent of this document is to precisely specify procedures for the visual evaluation of appearance of colored materials or parts incorporated in the manufacture of vehicles. The document provides a consistent engineering practice for the determination
Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2013-08-14
- 實施
This European Standard is applicable to the cap used to provide protection and end closing for the adaptor for bottom loading and unloading of tanks for the transport of dangerous goods. It specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR (flammable liquids) that have a vapour pressure not exceeding 110 kPa at 50 °C, including petrol, and that are not sub-classified as toxic or corrosive.
Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading
- ICS
- 23.020.20
- CCS
- T27
- 發布
- 2013-08-01
- 實施
- 2013-08-01
ASME Boiler & Pressure Vessel Code - Section 12: Rules for Construction and Continued Service of Transport Tanks
- ICS
- 23.020.20;27.060.30
- CCS
- T27
- 發布
- 2013
- 實施
Rules for Periodic Inspection of Metal Atmospheric Pressure Tanks of Railway Tank Cars for Hazardous Chemicals
- ICS
- 23.020.20
- CCS
- T27
- 發布
- 2012-01-18
- 實施
- 2012-05-01
This Recommended Practice provides procedures for defining the Accelerator Heel Point and the Accommodation Tool Reference Point, a point on the seat H-point travel path which is used for locating various driver workspace accommodation tools in Class B vehicles (heavy trucks and buses). Three accommodation tool reference points are available depending on the percentages of males and females in the expected driver population (50:50, 75:25, and 90:10 to 95:5). These procedures are applicable to both the SAE J826 HPM and the SAE J4002 HPM-II.
Accommodation Tool Reference Point for Class B Vehicles
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2011-10-31
- 實施
- 2011-11-08
Reference lines have been developed to which driver workspace accommodation tools can be located in vehicle space. The lines describe horizontal reference point locations as a function of vehicle h-point height (H30). One reference line has been established for use in vehicles with H-point heights (H30) and steering wheel diameters (W9) less than 405 and 450 mm, respectively. (Class A Vehicles) This point can be used to reference appropriate workspace tools to accommodate a driver population with a male to female ratio of one to one. separate reference lines have been established for use in vehicles with h-point heights (H30) between 405 and 530 mm and steering wheel diameters (W9) between 450 and 560 mm with treadle type pedals. (Class B vehicles) three lines are available for use in Class B vehicles depending on the percentages of males and females in the population the designer wishes to accommodate. Separate points can be used to reference appropriate workspace tools to accommodate driver populations with male-to-female ratios of 50:50, 75:25 and 90:10 to 95:5. Different procedures for locating Class A and Class B accommodation tool reference lines in vehicle space have been established based on unique packaging considerations of the two categories of vehicles.
Accommodation Tool Reference Point
- ICS
- 43.040.60
- CCS
- T27
- 發布
- 2009-02-10
- 實施
Swap bodies and commercial vehicles - Tarpaulins - Part 2 : minimum requirements for curtainsiders.
- ICS
- 55.180.10
- CCS
- T27
- 發布
- 2006-12-01
- 實施
- 2006-12-20
Rubber sealing strip for passenger car doors and windows
- ICS
- CCS
- T27
- 發布
- 2000
- 實施
- 1991-05-01
Flocking sealing strip for passenger car doors and windows
- ICS
- CCS
- T27
- 發布
- 2000
- 實施
- 1991-05-01
Plastic sealing strip for passenger car doors and windows
- ICS
- CCS
- T27
- 發布
- 2000
- 實施
- 1991-05-01
