QB/T 5396-2019 水晶自動研磨機

Crystal automatic grinding machine

DIN EN ISO 28764:2011 搪玻璃釉.薄鋼板,薄鋁板和鑄鐵上搪瓷試樣的制備(ISO 28764-2008);德文版本EN ISO 28764:2011

This International Standard specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings. It specifies two different specimens: - specimens taken from production articles; - specially produced specimens.

Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008); German version EN ISO 28764:2011

QB/T 4171-2011 行列式制瓶機

本標準規定了行列式制瓶機的分類、規格系列、要求、試驗方法、檢驗規則及標志、包裝、運輸、貯存。 本標準適用于玻璃瓶罐工業自動成型各種小口瓶和大口瓶的行列式制瓶機系列產品。

Individual section forming machine

BS EN 13035-1:2008 平面玻璃的制造、處理和加工用機械和設備.安全要求.工廠內部儲存、裝卸與運輸設備

1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt with in prEN 13035-2. 1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes, hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with the glass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1. 1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment for the storage, handling and transportation of flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for any type of equipment in the scope of this standard. 1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside the factory, which is manufactured before the date of its publication as EN.

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

DIN EN 15159-1:2006 釉瓷和搪瓷.加工廠的玻璃層設備.第1部分:設備、部件、器具和附件的質量要求

This European Standard specifies the quality requirements for apparatus, components, appliances and accessories of vitreous glass-lined steel (including semi-crystallized enamel coatings) and steel cast used for process plants. It specifies the quality requirements and the tests to be carried out by the manufacturer as well as the necessary actions for repairing defects. This European Standard is also applicable to glass-lined pumps, pump components and fittings. This European standard is not applicable to glass-lined flanged steel pipes and flanged steel fittings. NOTE 1 Provisions for glass-lined flanged steel pipes and flanged steel fittings are given in DIN 2876 [1]. The test methods specified cover checking the enamel, dimensional accuracy and performance of apparatus and components. This European Standard applies to new apparatus and components as well as used ones that have to be re-enamelled. This European Standard does not contain requirements regarding the chemical and physical properties of vitreous and porcelain enamels. NOTE 2 Examples of test reports are given in Annex A.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories; German version EN 15159-1:2006

DIN EN 15159-3:2006 釉瓷和搪瓷.加工廠的玻璃層設備.第3部分:抗熱震性

This European Standard specifies requirements on thermal shock resistance as well as heating and cooling procedures of standardised glass-lined apparatus, components, accessories, and glass-lined pipes primarily used for process equipment in chemical plants. It specifies the limits of thermal shock resistance using diagrams (see Figure 1 and Figure 2). For glass-lined steel, a difference is made between a thermal shock on the glass-lined side (by charging an apparatus) versus a thermal shock on the steel side (by heating and cooling an apparatus). This European Standard applies to operating temperatures from - 25 °C to + 230 °C. This European Standard is only applicable to enamelled unalloyed and low-alloy carbon steels.

Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 3: Thermal shock resistance; German version EN 15159-3:2006

QB/T 2557-2002 制糖機械產品型號編制方法

本標準規定了制糖機械產品型號編制方法。 本標準適用于制糖機械產品。

Programming method for the types of sugar machinery

QB/T 1305-2000 浸沖式洗瓶機

本標準規定了浸沖式洗瓶機的定義、產品分類、技術要求、試驗方法、檢驗規則和標志、包裝、運輸、貯存。 本標準適用于清洗回收的巴氏消毒乳玻璃瓶或其他裝灌有液態飲料的類似形狀玻璃瓶[見附錄A(標準的附錄)表A2]的浸沖式洗瓶機(以下簡稱“洗瓶機”)。

Dipping bottle washing machine

ISO 2734:1997 釉瓷和搪瓷 用堿性液體的試驗器械

This International Standard specifies the apparatus to be used for testing the resistance of flat surfaces of vitreous and porcelain enamels to attack by hot aqueous alkaline solutions such as solutions of sodium hydroxide.

Vitreous and porcelain enamels - Apparatus for testing with alkaline liquids

QB/T 2128-1995 日用陶瓷鏈?zhǔn)礁稍锲鳠峁ば阅苤笜?biāo)監測與計算方法

本標誰規定了日用陶瓷鏈?zhǔn)接谠锲鳠峁せ拘阅苤笜?biāo)監測與計算方法。 本標準適用于日用陶瓷坯體干燥過程中，使用熱煙氣、各類窯爐余熱和鍋爐飽和水蒸氣為干燥器熱源的鏈?zhǔn)礁稍锲鳠峁せ拘阅鼙O(jiān)測與計算。

Monitoring and Calculation Method of Thermal Performance Index of Daily Ceramic Chain Dryer

QB/T 2101-1995 真空練泥機

本標準規定了真空練泥機的產品分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存。 本標準適用于真空練制陶瓷塑性泥料的真空練泥機。

Vacuum mud refining machine

QB/T 2102-1995 陶瓷工業用球磨機

本標準規定了陶瓷工業用球磨機(簡稱“球磨機”)的產品分類、技術要求和試驗方法、檢驗規則、標志、包裝、運輸、貯存。 本標準適用于粉磨陶瓷原料的各種型式、規格的濕法間歇式球磨機。

Ball mill for ceramic industry

JIS A 5532:1994 浴缸

この規格は，浴槽について規定する。

Bathtubs

JIS A 5533:1993 搪瓷排氣管

Porcelain enameled exhaust pipes

QB/T 1764-1993 濕式磁選機

本標準規定了濕式磁選機的產品分類、技術要求、試驗方法和檢驗規則。 本標準適用于日用陶瓷工業用的濕式磁選機(以下簡稱“磁選機”)，建材陶瓷和電瓷工業用磁選機亦可參照本標準。

Wet magnetic separator

QB/T 1763-1993 日用陶瓷機械產品型號編制方法

本標準規定了日用陶瓷機械產品的型號編制原則。 本標準適用于日用陶瓷機械產品(以下簡稱“產品”)的型號編制。其他陶瓷機械產品的型號編制也可參照使用。

Model preparation method of daily-use ceramic machinery products

QB/T 1765-1993 液壓自動壓磚機

本標準規定了液壓自動壓磚機(以下簡稱“壓磚機”)的產品分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存。 本標準適用于建筑陶瓷墻地磚粉料壓力成型的壓磚機。

Hydraulic automatic brick press

EN 60335-2-60:1991/prAA:1992 家用及其類似用途電器的安全.第2部分第60節:渦流式浴盆及其類似設備的特殊要求

Safety of household and similar electrical appliances; part 2: particular requirements for whirlpool baths and similar equipment

QB/T 1069-1991 螺旋槳攪拌機

本標準規定了螺旋槳攪拌機(簡稱“攪拌機”)的基本參數、技術要求、試驗方法和檢驗規則。 本標準適用于陶瓷工業用來攪拌泥漿和潮解泥料的攪拌機。

propeller mixer

QB/T 1068-1991 液壓推車機

本標準規定了液壓推車機(簡稱“推車機”)，的基本參數、技術要求、試驗方法和檢驗規則。 本標準適用于陶瓷工業及耐火材料工業的窯車式隧道窯推車機。

Hydraulic cart machine