鎳鐵鉻硅合金（UNS N08330和N08332）無縫管

Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

高溫合金性能

Report on the Elevated-Temperature Properties of Selected Superalloys

鎳, 鈷和高溫合金的化學分析的標準試驗方法

Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys

金屬基復合材料的測試、分析與失效模式

Testing, Analysis and Failure Modes of Metal Matrix Composites

高溫下循環加熱和應力對金屬的影響研討會

SYMPOSIUM ON EFFECT OF CYCLIC HEATING AND STRESSING ON METALS AT ELEVATED TEMPERATURES

基本環境因素對高溫下金屬強度、蠕變和脆化的基礎效應研討會

Seminar on the fundamental effects of basic environmental factors on strength, creep and embrittlement of metals at high temperatures

高溫合金的X射線與光學發射分析

X RAY AND OPTICAL EMISSION ANALYSIS OF HIGH-TEMPERATURE ALLOYS

測量水和廢水中的有機污染物

Measuring organic pollutants in water and wastewater

不銹鋼鑄件

Stainless steel castings

高溫合金及耐蝕合金中硅含量檢測 電感耦合等離子體原子發射光譜法

Determination of silicon content in high temperature alloys and corrosion resistant alloys by inductively coupled plasma atomic emission spectrometry

航空航天系列 耐高溫合金NI-PH1301（NiCr19Co18Mo4Ti3Al3） 固溶處理和時效處理 棒材和型材 De 200 mm

Aerospace series high temperature resistant alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) Solution treated and aged bars and profiles De 200 mm

航空航天系列 耐熱合金 NI-PH1301（NiCr19Co18Mo4Ti3Al3） 固溶處理和沉淀處理 棒材和型材 D 200 mm

Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - D 200 mm; German and English version EN 4374:2022

高溫合金和金屬間化合物高溫材料的分類和牌號

Classification and designation for superalloys and high temperature intermetallic materials

高溫合金試驗方法.第1部分：縱向低倍組織及缺陷酸浸檢驗

Test method for superal loys.Part 1:Verification of longitudinal macro-structures and defect by etch

高溫合金試驗方法.第2部分：橫向低倍組織及缺陷酸浸檢驗

Test methods for superalloys.Part 2:Verification of transverse macro-structures and defect by etch

高溫合金試驗方法.第4部分：軋制高溫合金條帶晶粒組織和一次碳化物分布測定

Test methods for superalloys.Part 4:Determination of characterizing banding grains and primary carbides distribution of superalloy rollings

鍛制高溫合金 雙重晶粒組織和一次碳化物分布測定方法

Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings

高溫合金鑄件 晶粒度、一次枝晶間距和顯微疏松測定方法

Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings

鋼鐵及合金.痕量元素的測定.第11部分:電感耦合等離子體質譜法測定銦和鉈含量

Steel and alloy - Determination of trace element contents - Part 11: Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method

鋼鐵及合金.痕量元素的測定.第9部分:電感耦合等離子體發射光譜法測定鈧含量

Steel and alloy - Determination of trace element contents - Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method

高溫合金成品化學成分允許偏差

Permissible variations for chemical composition of superalloy products

航空發動機等軸晶高溫合金渦輪導向葉片 精鑄件規范

Specification for precision castings of equiaxed superalloy turbine guide blades for aeroengines

航空承力件用高溫合金熱軋和鍛制棒材規范

Specification for hot-rolled and forged bars of high-temperature alloys for aerospace load-bearing parts

耐腐蝕耐熱高溫合金、鎳及鎳合金 板材、薄板和帶材

Corrosion-resistant and heat-resistant superalloy, nickel and nickel alloy -- Plate, sheet and strip

鎳合金 鉈含量的測定 石墨爐原子吸收光譜法

Nickel alloy—Determination of thallium content— Graphite furnace atomic absorption spectrometric method