GB/T 41842-2022
Hoists for the transfer of diabled persons—Specification of configuration service (English Version)
- Standard No.
- GB/T 41842-2022
- Language
- Chinese, Available in English version
- Release Date
- 2022
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 41842-2022
- Scope
- This document specifies the classification of lifts for the disabled, supplier requirements, configuration service process, configuration service requirements and verification methods. This document is applicable to the configuration service of lifts for the disabled (hereinafter referred to as lifts). This document does not apply to the configuration services of the following lifting devices: --- Lifting machines that move people who are not in wheelchairs into and out of vehicles (GB/T16432-2016 121215); --- Move people in wheelchairs into and out of vehicles Auxiliary devices for vehicles (121218 in GB/T16432-2016); --- stair climbing appliances (121703 in GB/T16432-2016); --- vertical transport aids (1830 in GB/T16432-2016).
- Introduction
Interpretation of the Standardized Service Framework
Transfer lifts are important rehabilitation assistive devices and must comply with this national standard from February 2023. The core content includes the qualification threshold setting for service providers, the eight-step process specification for configuration services, and the three major quality control systems.
Equipment classification and application matrix
Classification dimensions Specific types Typical scenario examples Load-bearing posture adaptation Sitting/standing/lying type Sitting type is used for transfer between wheelchairs Installation method Fixed/mobile Ceiling rail fixed type is suitable for bed and chair transfer in wards User customization requirements Standard type/customized type Burn patients need customized lifting belt materials
Analysis of key implementation requirements
Core process control points
- Solution customization stage: Environmental mapping accuracy ±2cm, load safety factor ≥1.5
- Construction and installation stage: The impact protection level of exposed connection points must reach IK07
- Staff training standards: Theoretical teaching ≥4 class hours, practical examination pass rate 100%
Application example: A rehabilitation center project in Shanghai
After implementing the standardized plan, the number of displacement accidents decreased by 72%, service efficiency increased by 35%, and the ISO9001 quality system certification was successfully passed.
Innovative service management mechanism
Key points of the new regulations Traditional practices Improved content of standard requirements Service trace management Paper record preservation Electronic file preservation ≥5 years (GB/T18894) Follow-up mechanism Non-scheduled communication Systematic follow-up frequency ≤180 days Risk management Passive maintenance Establish three-level warning threshold indicators
Technical implementation suggestions
- Carry out the service provider qualification filing review, focusing on the verification of SAC/TC148 certification
- Establish a digital twin modeling system to verify the compatibility of building parameters (such as door height ≥ 2.1m)
- Configure the service package to add an AR operation guidance module to achieve remote technical support
GB/T 41842-2022 Referenced Document
- DA/T 42 Requirements of business records management
- GB/T 16432-2016 Assistive products for persons with disability—Classification and terminology
- GB/T 17242 Guidelines for complaints handling
- GB/T 18894 Specification on electronic documents archiving and electronic records management
- GB/T 20404 Requirements and test methods for lifts for the disabled
GB/T 41842-2022 history
- 2022 GB/T 41842-2022 Hoists for the transfer of diabled persons—Specification of configuration service