GB/T 40360-2021
Still beverage metal cans filling and sealing machine—General technical specifications (English Version)
- Standard No.
- GB/T 40360-2021
- Language
- Chinese, Available in English version
- Release Date
- 2021
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 40360-2021
- Scope
- This document specifies the terms and definitions, model, type, basic parameters and working conditions, technical requirements, test methods, inspection rules, marks, packaging, transportation and storage of non-carbonated beverage metal cylinder filling and sealing machines. This document applies to equipment that uses metal cylinders as packaging containers to automatically complete the processes of metering, filling, and sealing of non-gas beverages (hereinafter referred to as "filling and sealing machines").
- Introduction
Analysis of the core content of the standard
Technical dimension Hot filling equipment Room temperature filling equipment Operating temperature range 0-95℃ 0-35℃ Sealing structure requirements Comply with GB/T14251-2017 double curling standard Typical energy consumption index ≥7.5kW ≥5.5kW
Detailed explanation of key technical indicators
The standard stipulates that filling accuracy is divided into two measurement methods: weight and volume: When the net content is 100-200g/mL, the allowable deviation is ±2.25%, and the accuracy in the range of 300-400g/mL is increased to ±1.5%. The material loss rate must be controlled at ≤0.4%, and the can loss and cover loss rates should be ≤0.1%.
Safety protection system
Taking the special-shaped can filling machine as an example, triple protection must be configured: 1) Emergency stop button response time <0.5s; 2) Moving parts protective cover gap <6mm; 3) IP65 electrical protection. Typical fault handling cases show that the crimping defect rate is reduced by 82% after the torque sensor is installed.
Implementation suggestions
- When accepting new equipment, the qualified rate of packaging should be tested for 8 consecutive hours (≥99.5%)
- Inspect the wear of the hemming roller every month (recommended threshold value <0.1mm)
- The CIP cleaning cycle should not exceed 72 hours
GB/T 40360-2021 Referenced Document
- GB 16798 Food machinery safety requirements*， 2023-09-08 Update
- GB 2894 Safety Colors and Safety Signs*， 2025-05-30 Update
- GB/T 13277.1 Compressed air—Part 1：Contaminants and purity classes*， 2023-05-23 Update
- GB/T 13306 Plates
- GB/T 13384 General specifications for packing of mechanical and electrical product
- GB/T 14251 General technical standard for metal container of canned food
- GB/T 191 Packaging.Pictorial marking for handling of goods
- GB/T 3766 Hydraulic fluid power.General rules and safety requirements for systems and their components
- GB/T 4208 Enclosure protection level (IP code) "Amendment No. 1" GB/T 4208-2017
- GB/T 5226.1 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
- GB/T 7311 Classification and editorial nominating method for packaging machinery
- GB/T 7932 Pneumatic fluid power-General rules and safety requirements for systems and their components
- GB/T 8196 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards
- GB/T 9969 General principles for preparation of instructions for use of industrial products
- JJF 1070 Measurement and Inspection Rules for Net Content of Quantitatively Packaged Commodities*， 2024-04-09 Update
GB/T 40360-2021 history
- 2021 GB/T 40360-2021 Still beverage metal cans filling and sealing machine—General technical specifications